Flush your water heater to prevent future water damage
Prevent water heater damage, flush your water heater to prevent damage.
Flushing your water heater is necessary to maintain its function and prevent the buildup of sediment within the unit. Flushing your water heater will also help prevent future potential damage.
Flush your water heater.
Your water heater is one of the most important and expensive appliances in your home. It's also one of the most neglected, especially if you don't regularly flush it out. When you don't regularly flush out sediment and mineral deposits from your water heater, they can build up over time, causing corrosion damage that can lead to leaks or other problems with your unit.
The best way to avoid this situation is by flushing out sediment and minerals every six months to a year. Flushing refers specifically to running cold water through all parts of an electric or gas tankless model until all residue has been removed from every nook and cranny inside before draining any remaining water into a bucket or outside.
How to flush a water heater.
To flush a water heater, turn off the power to the unit. Open the drain valve on the bottom of your water heater tank and allow it to drain into an appropriate container until all water has been removed. Close this valve when you're done draining, then turn on your power again.
Precautions to take when flushing your water heater?
Before you begin, make sure the electricity is turned off. Then, use a garden hose and cold water to flush out any sediment that may be inside your tank. If you have an electric water heater, also turn off the circuit breaker for it before beginning this process. Do not use chemical cleaners or power washers during flushing; these can damage your appliance or cause further damage if used improperly!
Maintain proper function.
Flushing a water heater is important to maintain its function and prevent future potential damage. Flush your water heater once a year. It's recommended that you flush the tank every year, or more frequently if you live in an area with hard water or high mineral content.
Check for leaks in the pipes leading from your hot water tank before flushing it out. If there are any signs of corrosion, leaks or rusting on these pipes or anywhere else on the water heater, it may be time to call a professional who can assess whether the unit needs replacement or repair. Do not use any chemicals when flushing out your hot water tank. The chemicals could damage other parts inside of your system if they weren't meant for use with them. Always wear protective gear when working around hot surfaces such as those found inside of boilers/water heaters.
Flushing your water heater is a great way to maintain its function and prevent future potential damage. We hope this article has given you some insight into how flushing works and what precautions to take when doing so.
How Long Will Water Damage Repair Take To Complete?
Water mitigation can be overwhelming, let the professionals at SERVPRO help.
If you've experienced a water loss in your home, you're probably wondering how long it will take to repair. Well, that depends on a few factors. This blog will explain the various factors that can affect the mitigation and restoration time.
When you experience water damage to your home, the last thing you want is extended downtime.
Whether it’s because of a burst pipe or a leaking roof, there’s a lot that could go wrong if the problem isn’t addressed quickly and correctly.
In fact, the longer it takes for you to get back up and running after such an incident, the more likely it is that your insurance company will refuse to pay for repairs because they weren't made in a timely manner or your property will have suffered from further damage that is more time-consuming and costly to repair.
How much time will it take to mitigate the damage?
The longer the water is allowed to stay in your home, the more damage it will cause. The same is true for drying out the area. If you are able to get a water damage repair company on site quickly and that company can begin mitigation of the damage immediately, then you can expect a much faster repair process.
Drying time depends on a few factors.
Drying out your property depends on several factors, including:
The size of the water loss: The larger the area affected, the longer it will take for your home to dry out.
The type of material that was damaged: Different materials absorb water differently and require different drying methods. Wood takes longer than carpeting or linoleum because wood is porous and absorbs more moisture than other types of flooring materials.
What will happen once the drying process has been completed?
Once the drying process has been completed, your water damage repair company will move on to the next step of restoring your home to preloss condition. This could include cleaning and disinfecting damaged areas, replacing broken items, or even rebuilding walls or ceilings that were compromised during the loss.
Variables to consider following a water loss.
The length of time it takes to complete a water damage repair depends on several factors.
To determine how long your water restoration project will take, consider these factors:
- The type of water loss
- The extent of damage
- The amount of water present after the loss
- Location in your home where the damage occurred
- What materials were affected
The steps and timeline vary widely.
Water damage repair can take anywhere from a few days to a few weeks, depending on the extent of the damage and the drying time. The longer it takes for your home or business to dry out, the longer it will take for you to get back to normal.
Water mitigation and repair can be an overwhelming process. It’s important to understand the steps involved in restoring your home after a water loss and how long they take so you can plan accordingly. We hope this blog post has provided some insight into how long it takes for these repairs to be completed, but we also encourage you to reach out if you have any questions about our services or would like assistance with your project!
How To Create a Residential Fire Escape Plan
A fire escape plan is a vital part of home safety.
How to Prepare for a Fire in your Home
A fire escape plan is crucial for keeping your family safe in an emergency, and it happens to be one of the easiest things you can do: all you need to do is draw a map of your home, deciding on exits and meeting places. You don't have to be an artist or a designer to create a useful escape plan; anyone can do it! Here are some tips for creating a fire escape plan that will help keep your family safe.
Planning could save your life.
A fire escape plan is a vital part of home safety. It is a document that outlines the steps you and your family should take in the event of a fire. The plan should be shared with all residents who live in your home, and ideally, it should be reviewed with them once a year. A fire escape plan can be used to prevent injuries or even save lives.
For many people, it may take some time to develop a thorough fire escape plan for their home. However, if you follow these steps, then you'll be able to create one in no time at all!
1) Identify all possible emergencies that could occur at home, such as fires, gas leaks, or floods.
2) Map out two ways out of each room in your house: one for emergencies when there's no time for preparation (such as if you hear smoke alarms going off), and another for situations where you have more time to prepare for what you need.
3) Designate a meet-up place outside of your home where all the residents should go in the event of a fire emergency.
Practice, practice, practice.
The most important part of creating a fire escape plan is practicing it. If you don't practice, your family won't know what to do in an emergency and may loose precious seconds trying to figure it out. This can be especially dangerous if you have young children or pets in your home because they may panic if they feel trapped and confused about where to go.
Practicing your fire escape plan is also important because it will give everyone involved an opportunity to identify any weaknesses in the plan that need addressing before an actual fire occurs. For example, if one person cannot physically get through a doorway due to either injury or physical limitation, the rest of the family should know how to help them get out safely as quickly as possible by using another exit route instead.
Never go back inside a burning building.
It's important to remember that once you've escaped from a burning building, it is never safe to go back inside. The fire can reignite at any time, and if this happens while you're inside your house—even seconds after exiting with what seems like a perfectly intact space—then you may find yourself trapped by flames once again.
A firefighter who has experienced this himself will tell you: "You don't want to go back into an area where there are intense fires still burning." And even if there isn't any active flame in your house when it catches on fire again after escaping, there could be hot embers just waiting for an unsuspecting person or animal who wanders by later.
Plan for emergencies that are more likely to happen.
If you are a renter, who has insurance coverage through their landlord's insurance policy, then your first step is to find out what type of coverage you have. If you rent an apartment from a person renting out their own home, chances are that the landlord's homeowner's policy will cover your belongings and personal property. However, if you rent from an apartment complex or condo association board, it may not provide adequate coverage for any damages caused by fires or other disasters in your building. This is because homeowners' policies typically exclude apartments from coverage because they're considered commercial properties by state law. In these cases where there isn't enough protection available through the owner’s policy, many owners choose to purchase an additional renter’s policy that covers additional losses such as fire damage to personal property.
You can’t predict which emergency is going to happen when. But with a good emergency plan in place, it doesn’t matter. If a fire breaks out in your home, you know what to do and where to go. Make sure everyone in your family knows these steps too—it could save their lives!
Causes of Basement Flooding
Heavy rain can cause soil erosion around your foundation walls.
Causes of Basement Flooding
Whether your basement floods due to heavy rains or a broken hot water tank, it's important to know the cause of the flooding so you can prevent it in the future.
1. Heavy rains
First, heavy rain can cause your gutters to overflow, which can then leak into your basement through the foundation walls. This is especially common if you have a flat roof and are not able to properly clean out the gutters after a storm; the more debris that gets caught in the gutter, the more likely it is to overflow during heavy rains.
Second, heavy rain can increase the rate at which water drains from your roof into your yard. If this happens, it will also drain into your basement through cracks or other holes in the foundation. You may be able to prevent this by installing a proper roof drainage system and keeping trees and shrubs away from your home's perimeter so that they don't block runoff channels.
Third, heavy rain can cause soil erosion around your foundation walls. This can create cracks through which water can flow into your basement and cause flooding issues even when there isn't any leakage from above ground sources like gutters or roofs!
2. Clogged drains
Clogged drains are a common cause of basement flooding. The drain can become clogged with hair, food debris, or other materials that are flushed down the toilet without being properly disposed of. In such cases, water can back up and flood your basement floor. If you have a sump pump installed in your home's drainage system, it may be able to keep up with the flow of water coming into it through the drain—but if your sump pump fails to work properly and quickly enough because it is too small or old (or both), then flooding will occur anyway because there will be nowhere else for all that extra water to go!
What can I do? Check all your drains regularly so that they don't get clogged up; this will help prevent them from becoming blocked by hair or other debris which could lead to an emergency situation.
3. Broken hot water tank
A broken hot water tank can cause a lot of damage to your basement. Many hot water tanks are located in the basement and are a common cause of flooding when they break or leak. If you have an old, rusty tank, this is a possibility to consider.
Hot water tanks aren't always located in the basement and can be placed anywhere in the house but if there's any chance that yours is near your foundation and could leak or break, it's best to replace it with a new one immediately.
4. Frozen pipes
Frozen pipes can also be the cause of your flooding. The best way to prevent frozen pipes is by making sure that the temperature in your home remains above freezing, if possible. If you have a basement that is unfinished or otherwise not heated, make sure your heat is turned on and working properly. Check that there are no cracks or openings where warm air could escape from your house's walls or floor. You should insulate any exposed pipes with foam insulation tape during winter months to keep them warm and reduce their likelihood of freezing over (especially overnight).
5. Sewer system backup
If you have a sewer backup, it means that the sewer line is clogged and backed up water is coming into your home through the drains. This can cause a lot of damage to your home, so it's important to take care of this problem quickly! The first thing you should do is call a plumber who knows about these issues and can help unclog your pipes. He or she will most likely need to remove the entire drainpipe from under your sink, so plan on being without running water for at least one day while they fix it.
The best way to prevent basement flooding is to check your sump pump and drainage system and make sure it’s in working order. If you have clear gutters, the rainwater will flow away from your house rather than pooling at the foundation. You should also watch for clogs in drains and pipes so that water doesn’t overflow onto floors or into walls. Finally, be prepared for freezing temperatures by insulating pipes with bubble wrap or wrapping them with towels soaked in warm water before bedtime each night.
What is Content Cleaning After a Fire?
Fire damaged content in a building in Colorado Springs area
After a Fire, What Is Content Cleaning?
No one wants to experience the shock and fear of an unexpected fire incident. At SERVPRO of Colorado Springs Southeast, we understand how devastating it can be to lose everything in your home or business. That's why our team is dedicated to helping you through this difficult time, beginning with a thorough inspection of your property and belongings. You'll find that our cleaning methods and equipment are second-to-none when it comes to restoring content items like furniture, clothing, electronics, and other household goods after they've been damaged by fire or smoke damage.
It's never fun to experience a fire loss incident.
It's never fun to experience a fire loss incident. The damage can range from minor smoke damage to catastrophic structural damage and cause you to lose everything in your home, including sentimental items like photos, treasured heirlooms, and family memorabilia.
One thing that all fire losses have in common is the need for cleaning up after the flames have been put out and the smoke has settled. In almost every single case, the safest and most efficient way to handle a fire cleanup job is by calling your local SERVPRO experts for help. They have the training, experience, and equipment necessary to handle a fire cleanup job of any kind and can go about it safely.
Some belongings can be cleaned and restored
As you deal with the aftermath, remember that your belongings can often be cleaned and restored rather than replaced. For example, if your clothes were in a closet and were protected from fire exposure, then dry cleaning is an option that can remove smoke smell from clothing. Other items may have been affected by smoke or soot but are otherwise salvageable. These items can be cleaned with ultrasonic scrubbers or content cleaning processes at companies like SERVPRO of Colorado Springs Southeast.
Specialized cleaning methods and equipment
When you call SERVPRO of Colorado Springs Southeast, we'll make every effort to restore your belongings using specialized cleaning methods and equipment. We'll work with you to determine the best course of action, provide a written estimate and time frame for completion, and provide a detailed report of the work performed. As a locally owned and operated business in the Colorado Springs area, our team is always nearby and ready to help!
Inspection is the first step in content cleaning
The first step in content cleaning is a thorough inspection by one of our production specialists. We will discuss the condition of each item and make an estimate for cleaning costs. Our experts can also help you decide how to dispose of damaged items or store them until they are ready for use again. We offer pack-out services where our team removes your belongings out of your property and keeps them safely stored away at our warehouse during the restoration process.
We understand how difficult a fire loss can be, and we’re here to help. We don’t just offer cleanings—we also provide an array of services and resources that can help you get back on your feet after a fire loss. And if you need assistance with filing insurance claims or other paperwork, we have an experienced team that will take care of you from start to finish!
How SERVPRO Can Help on your insurance claims
SERVPRO to the rescue.
When you call a claim services agent about your business in southern Colorado after a disaster, you want a quick response. You also want to be sure that everything is being done correctly. You're still running a business, so keeping track of the project shouldn't be your job, but whose job is it? Your local SERVPRO franchise is uniquely qualified to help you keep on top of the work that is happening throughout the entire process.
1. Prompt Response in an Emergency
When you think of an emergency response, one of the most crucial aspects is the speed at which you get help. How supported you feel often shapes the entirety of the restoration experience. It's important that the person on the other end of the phone is confident, competent, and considerate, and that whoever comes to your property is prepared and professional. A SERVPRO team has a rigorous documentation process to adhere to that tracks your project from the first phone call.
2. Thorough Claims Inventory Service
The emergency remediation team keeps a record of every single thing that has been damaged and turns it into a detailed, itemized document with photos and descriptions. They can advise you as to whether something can be restored rather than replaced. You get copies of this document, as well as of everything else, throughout the remediation process, and they are also shared directly with your claim services representative.
3. Complete Pretesting Process
A complete pretesting process is undertaken to determine the extent of the damage to your business and to provide an accurate restoration quote before the work begins. This is an important step because it helps both you, the client, and your claim services agent know that you're receiving high-quality work at a fair industry price.
Emergency response doesn't have to be daunting if you choose to work with a company that understands the importance of organization and communication as its professionals help you get back to work.
SERVPRO of SE Colorado Springs
It has been our pleasure to SERV Colorado Springs in time of emergency for over 20 years. Our team prides itself on providing excellent, professional service to both commercial and residential markets.
Our mitigation and rebuild divisions are growing so that we can better assist our clients. We are still the insurance claim experts. We can handle your claim from start to finish after any type of disaster.
We are still the city leader in Emergency Water, Fire, Mold, and Smoke Damage Mitigation. We have certified technicians and crew chiefs with years of experience in the industry, ready to help at a moments notice. Even in the middle of the night.
Damage to wood flooring from plumbing flood.
As we transition to spring in Colorado we are still having cold nights. It is important to remember pipes can still freeze, and when the sun comes up they can still burst.
Water can damage carpet, carpet pad, wood and vinyl floors, drywall, baseboard, and trim. It can also lead to mold growth if not properly treated. Floods can occur in any room where water is running to or through on any level of any structure. Hose bibs are also quite the culprits during this time of year, so keep those hoses disconnected from the house for a little while longer.
The bigger the flood the bigger the required solution. No matter how big of a water loss your property incurs SERVPRO is here to help.
New Fire Restrictions For Colorado Springs
Photo Released by Colorado Springs Fire Department.
With a huge decline in moisture from nature this winter and a slow start to the Spring rain season... The city of Colorado Springs has imposed new rules to help keep our dry city free from wildfire.
With the lack of rainfall in recent weeks the Fire Departments of Colorado Springs are also doing active fire mitigation in-between fighting the blazes that have popped up all over our fair city and out East.
It is important as a community, that we do everything we can to prevent fires. These new rules will only help us be a safer place to raise our families.
At SERVPRO we pray for the best and prepare for the worst. We train for scenarios that are possible given our current situations. Our team is high caliber and ready at a moments notice. If our community needs us we will be there!
Wind Storms in Colorado Springs
Downed tree collapses roof.
If you've been outside you have noticed we just cant seem to get away from all this wind. It seems every week we have a day where we are reaching high digit speeds and these storms are leaving damage in their wake.
Roofing shingles and asphalt blown all over town, creating leaks in structures in various parts of our territory. Downed trees have penetrated structures causing extensive damage since December. Our crews have been working diligently to assist those in need with repairs and claims. SERVPRO is a preferred provider with most insurance companies and our teams can help you get back into your homes and buildings with life carrying on as normal.